Accessories Included with purchase
- 2 Extension wands for medium heights to floor cleaning
- Flexible 9 Foot hose with trigger
- Accessory adapter
- Detail Nozzle
- 1 stainless, 1 Brass, 8 Nylon detail cleaning brushes
- Large Triangle with clips
- Floor brush w/clips
- Medium Round Brush
- Window squeegee
- Filler Bottle
- Fitted pad
- 2 Stainless Steel Scrubbies
- 2 16×16 Microfiber Towels
Voltage : 110 – 120v
Power Cord: 14.5 ft
Hose Length: 9 ft w/ trigger
Boiler: Stainless Steel AISI 304
Automatic Safety Shutof
Pressure Flow Regulator- Full range
Weight: 18.5 lbs
HOW TO USE
PLEASE READ THE MANUAL BEFORE FIRST TIME USE
Slowly remove the pressure cap to take out any residual steam and then slowly fill 2 liters of water. Close the cap and wait until the display shows H2O signal. DO NOT fill any chemicals or detergents in the refill tank. * We recommend filtered water if possible. Always good quality low mineral content water is best such as filtered or bottled. Distilled is void of minerals. Tap is acceptable but should be descaled more often.
Open the front cover and insert the hose. Push the hose plug into the socket until you hear a click. Plug into a 120V ; 60Hz outlet with grounded connection.
Turn ON and the boiler will start to heat the water. The display will show the temperature.
First time use, leak the exceeding air by pushing the steam switch on the hose pistol grip a few times.
Your machine is now ready to use.
There are no reviews yet.